To display RIP routes.
Show RIP routes.
The command displays all RIP routes. For routes that are received through RIP, this command will display the time the packet was sent and the tag information. This command will also display this information for routes redistributed into RIP.
The command displays current RIP status. It includes RIP timer, filtering, version, RIP enabled interface and RIP peer inforation.
ripd> show ip rip status Routing Protocol is "rip" Sending updates every 30 seconds with +/-50%, next due in 35 seconds Timeout after 180 seconds, garbage collect after 120 seconds Outgoing update filter list for all interface is not set Incoming update filter list for all interface is not set Default redistribution metric is 1 Redistributing: kernel connected Default version control: send version 2, receive version 2 Interface Send Recv Routing for Networks: eth0 eth1 184.108.40.206 220.127.116.11 Routing Information Sources: Gateway BadPackets BadRoutes Distance Last Update